KD131D – KNOCK DOWN – HORNET AND WASP BLASTER – SPRAY

$10.99

Description

KNOCK DOWN™ –  KD131D – HORNET AND WASP BLASTER SPRAY

Actives:
D-Phenothrin     0.20%
Tetramethrin     0.20%

510g Aerosol
Domestic

  • Non – Staining
  • Kills wasps, yellow jackets, and hornets on contact
  • Gives rapid contact kill and residual kill of wasps and hornets returning to the treated nest 
  • Reaches nests more than 20 feet above ground
  • Custom cap with holder for extension tube
  • All angle 360° spray action
  • Dielectric Breakdown Voltage: 41.0 KV by ASTM Test Method D-877-87

*Do not use inside homes, on humans or animals.
*Do not use as a space spray.

ALWAYS READ THE LABEL CAREFULLY BEFORE USING THE PRODUCT – KEEP OUT OF REACH OF CHILDREN. 

Registered in Canada for the uses indicated on the label and can be sued SAFELY when the label directions are followed.  (Health Canada does not recommend, promote or endorse any products).

Bug List

Eliminates

  • Hornets
  • Wasps
  • Yellowjackets

Applications

USE ONLY AS DIRECTED ON THIS LABEL
NOT FOR USE INSIDE DWELLINGS

DIRECTIONS FOR USE
Do not treat when food is present. Clean treated surfaces before being used to prepare food.
Shake well before using. Use only for spot, perimeter or crack and crevice applications. A spot treatment is made to a localized surface area not greater than 0.2 m2. Spots are not to be adjoining and the total area of spots is not to exceed 10% of the surface area being treated (for example, floors, walls, ceilings). A crack and crevice application is made into narrow openings on the surfaces of the structure. Such openings commonly occur at expansion joints, utility entry points and between different elements of construction (for example, baseboards, moulding). An exterior perimeter/band application of a pest control product is made as a band or strip less than 1 m wide.

For Control of Nests of Wasps, Yellow jackets, and Hornets:
The best time to spray the nest is in the early morning or early evening, when air temperature is cooler and most insects are in the nest and little activity is observed around the nest opening. Spray only if the air is still. Stand at a safe distance from the nest, not directly under it. Hold container upright at arms length, point the actuator at the nest and spray into the opening of the nest first. Then spray the rest of the nest until it is saturated. Treated insects may fall out of the nest and die. Any insects returning to the nest after treatment will be killed. After 48 hours, wear gloves to remove the treated nest. Foliage of desirable plants that were contacted with spray should be hosed off.

ALWAYS READ THE LABEL CAREFULLY BEFORE USING PRODUCT.

SDS EN/FR

kd131d-en
kd131d-fr